Glenn Grant
Materials Scientist
Glenn Grant
Materials Scientist
Patents
- U.S. Patent No. 11,684,959, June 27, 2023, “DEVICES AND METHODS FOR PERFORMING SHEAR-ASSISTED EXTRUSION, EXTRUSION FEEDSTOCKS, EXTRUSION PROCESSES, AND METHODS FOR PREPARING METAL SHEETS (iEdison No. 0685901-13-0018)”
- U.S. Patent No. 11,534,811, December 27, 2022, “Method for Forming Hollow Profile Non-Circular Extrusions Using Shear Assisted Processing and Extrusion (ShAPE)”
- U.S. Patent No. 11,517,952, December 6, 2022, “SHEAR ASSISTED EXTRUSION PROCESS”
- United States Patent 11,045,851, June 29, 2021, “Method for forming hollow profile non-circular extrusions using Shear Assisted Processing and Extrusion (ShAPE)”
- United States Patent 10,695,811, June 30, 2020, “Functionally graded coatings and claddings”
- United States Patent 10,109,418, October 23, 2018, “System and process for friction consolidation fabrication of permanent magnets and other extrusion and non-extrusion structures”
- United States Patent 9,283,637, March 15, 2016, “Friction stir weld tools having fine grain structure”
- United States Patent 8,544,714, October 1, 2013, “Certification of a weld produced by friction stir welding”
- United States Patent 8,434,661, May 7, 2013, “Friction stir welding tool and process for welding dissimilar materials”
Publications
2023
- Escobar J.D., B.S. Taysom, G.J. Grant, S.A. Whalen, A. Soulami, and L. Li. 2023. Sensing and Control During Bulk SPP. PNNL-34995. Richland, WA: Pacific Northwest National Laboratory. Sensing and Control During Bulk SPP
- Garcia D., H. Das, K. Sadayappan, P. Newcombe, D.R. Herling, G.J. Grant, and M. Komarasamy. 2023. "Solid Phase Processing of Mg-Al-Mn-Ca for High Strength and Ductility." In TMS Annual Meeting & Exhibition, Magnesium Technology 2023, March 19-23, 2023, San Diego, CA. The Minerals, Metals & Materials Series., edited by S. Barela, et al, 131-133. Cham:Springer. PNNL-SA-178509. doi:10.1007/978-3-031-22645-8_27
- Reza E Rabby M., H. Das, T. Wang, M. Komarasamy, S.A. Whalen, and G.J. Grant. 2023. "High-Speed Friction Stir Butt Welding of 25.4 mm Thick 7175-T79 Aluminum Alloy." Manufacturing Letters 38. PNNL-SA-184859. doi:10.1016/j.mfglet.2023.08.140
- Reza E Rabby M., X. Li, G.J. Grant, S.N. Mathaudhu, and A.P. Reynolds. 2023. "Process parameters and system responses in friction extrusion." Journal of Manufacturing Processes 85. PNNL-SA-166885. doi:10.1016/j.jmapro.2022.11.027
- Samanta A., H. Das, G.J. Grant, and S. Jana. 2023. "Enhanced Tensile and Tear Toughness Properties of Thin-Wall Vacuum-Assisted High-Pressure Die-Cast Aural-5 Alloy by Friction Stir Processing." In TMS 2023: Friction Stir Welding and Processing XII Symposium held at the TMS Annual Meeting and Exhibition, March 19-23, 2023. San Diego, CA. Minerals, Metals and Materials Series, edited by Y. Hovanksi, et al, 41-49. Cham:Springer. PNNL-SA-177752. doi:10.1007/978-3-031-22661-8_4
2022
- Garcia D., H. Das, X. Ma, T.J. Roosendaal, G.J. Grant, and M. Komarasamy. 2022. "Exploring the Microstructure-Property Relationship of Mg-Al-Mn alloys enhanced via Friction Stir Processing." In Magnesium Technology Symposium held at the TMS Annual Meeting and Exhibition, (Magnesium Technology 2022), February 27-March 3, 2022, Anaheim, CA, edited by P. Maier, et al, 197-200. Cham:Springer. PNNL-SA-167290. doi:10.1007/978-3-030-92533-8_33
- Li L., M. Reza E Rabby, N.R. Overman, T. Wang, S.A. Whalen, G.J. Grant, and S.N. Mathaudhu, et al. 2022. "Analysis of contact conditions and microstructure evolution in shear assisted processing and extrusion using smoothed particle hydrodynamics method." Materials & Design 221. PNNL-SA-173428. doi:10.1016/j.matdes.2022.111010
- Li X., M. Reza E Rabby, A.D. Guzman, G.J. Grant, S.N. Mathaudhu, M. Hinton, and A.P. Reynolds. 2022. "Strain and strain rate in friction extrusion." Journal of Materials Research and Technology 20. PNNL-SA-170376. doi:10.1016/j.jmrt.2022.07.116
- Ma X., X. Li, G. Petrossian, A. Ortiz, M. Komarasamy, S.A. Whalen, and G.J. Grant, et al. 2022. "Porosity evolution during heating of copper made from powder by friction extrusion." Materialia 21. PNNL-SA-166323. doi:10.1016/j.mtla.2022.101341
- Nasim W., H. Das, S.S. Kulkarni, A. Rohatgi, D.R. Herling, G.J. Grant, and P. Upadhyay, et al. 2022. "Local Thermomechanical Processing for Improving Formability of High Strength Aluminum Sheets." In SAE Annual World Congress Experience, (WCX 2022), April 5-7, 2022, Virtual, Online. SAE Technical Papers, Paper No. 2022-01-0244. Warrendale, Pennsylvania:SAE International. PNNL-SA-168320. doi:10.4271/2022-01-0244
- Peles A., S.A. Whalen, and G.J. Grant. 2022. Sparse Data Machine Learning Integration with Theory, Experiment and Uncertainty Quantification: Process-Structure-Property-Performance of Friction Deformation Processing. PNNL-32875. Richland, WA: Pacific Northwest National Laboratory. Sparse Data Machine Learning Integration with Theory, Experiment and Uncertainty Quantification: Process-Structure-Property-Performance of Friction Deformation Processing
- Samanta A., H. Das, D. Garcia, R.J. Seffens, T.J. Roosendaal, A.D. Guzman, and G.J. Grant, et al. 2022. "Microstructural modification of a high-pressure die-cast A380 alloy through friction stir processing and its effect on mechanical properties." In Light Metals Symposium held at the TMS Annual Meeting and Exhibition, February 27-March 3, 2022. Anaheim, CA. Minerals, Metals and Materials Series, edited by D. Eskin, 766 - 771. Cham:Springer. PNNL-SA-166425. doi:10.1007/978-3-030-92529-1_101
- Samanta A., H. Das, G.J. Grant, and S. Jana. 2022. "Effect of tool design and pass strategy on defect elimination and uniform, enhanced tensile properties of friction stir processed high-pressure die-cast A380 alloy." Materials Science and Engineering A. Structural Materials: Properties, Microstructure and Processing 861. PNNL-SA-177217. doi:10.1016/j.msea.2022.144388
- Samanta A., R.J. Seffens, H. Das, A.D. Guzman, T.J. Roosendaal, D. Garcia, and M. Song, et al. 2022. "Microstructure-refinement-driven enhanced tensile properties of high-pressure die-cast A380 alloy through friction stir processing." Journal of Manufacturing Processes 78. PNNL-SA-170274. doi:10.1016/j.jmapro.2022.04.027
- Wang T., X. Li, B. Gwalani, G.J. Grant, and C.A. Powell. 2022. "Compositionally graded aluminum-silicon alloy fabricated via friction extrusion." Materials Today Communications 33. PNNL-SA-170396. doi:10.1016/j.mtcomm.2022.104423
2021
- Komarasamy M., X. Li, S.A. Whalen, X. Ma, N.L. Canfield, M.J. Olszta, and T. Varga, et al. 2021. "Microstructural evolution in Cu-Nb processed via friction consolidation." Journal of Materials Science 56, no. 22:12864-12880. PNNL-SA-158852. doi:10.1007/s10853-021-06093-9
- Li X., C. Zhou, N.R. Overman, X. Ma, N.L. Canfield, K.S. Kappagantula, and J.G. Schroth, et al. 2021. "Copper carbon composite wire with a uniform carbon dispersion made by friction extrusion." Journal of Manufacturing Processes 65. PNNL-SA-159070. doi:10.1016/j.jmapro.2021.03.055
- Li X., M. Reza E Rabby, M.E. Ryan, G.J. Grant, and A.P. Reynolds. 2021. "Evaluation of Orthogonal Strain Components in Friction Extrusion." Journal of Materials Research and Technology 15. PNNL-SA-157484. doi:10.1016/j.jmrt.2021.10.001
- Overman N.R., M.J. Olszta, M.E. Bowden, X. Li, A. Rohatgi, S.N. Mathaudhu, and G.J. Grant, et al. 2021. "The Onset of Alloying in Cu-Ni Powders Under High-shear Consolidation." Materials & Design 211. PNNL-SA-165452. doi:10.1016/j.matdes.2021.110151
- Overman N.R., X. Li, M.J. Olszta, E.K. Nickerson, C.T. Overman, S. Mathaudhu, and G.J. Grant, et al. 2021. "Microstructural Progression of Shear-Induced Mixing in a CuNi Alloy." Materials Characterization 171. PNNL-SA-155870. doi:10.1016/j.matchar.2020.110759
2020
- Nelaturu P., S. Jana, R.S. Mishra, G.J. Grant, and B. Carlson. 2020. "Effect of temperature on the fatigue cracking mechanisms in A356 Al alloy." Materials Science and Engineering. A. Structural Materials: Properties, Microstructure and Processing 780. PNNL-SA-152052. doi:10.1016/j.msea.2020.139175
2019
- Li X., N.R. Overman, T.J. Roosendaal, M.J. Olszta, C. Zhou, H. Wang, and T.A. Perry, et al. 2019. "Microstructure and mechanical properties of pure copper wire produced by shear assisted processing and extrusion." JOM. The Journal of the Minerals, Metals and Materials Society 71, no. 12:4799-4805. PNNL-SA-147051. doi:10.1007/s11837-019-03752-w
2018
- Nelaturu P., S. Jana, R.S. Mishra, G.J. Grant, and B. Carlson. 2018. "Influence of friction stir processing on the room temperature fatigue cracking mechanisms of A356 aluminum alloy." Materials Science and Engineering. A. Structural Materials: Properties, Microstructure and Processing 716. PNNL-SA-130375. doi:10.1016/j.msea.2018.01.044
2017
- Ross K.A., B. Sutton, G.J. Grant, G.R. Cannell, G. Frederick, and R. Couch. 2017. "Development of Friction Stir Processing for Repair of Nuclear Dry Cask Storage System Canisters." In Friction Stir Welding and Processing IX, edited by Y Hovanski, et al, 39-46. Cham:Springer International Publishing. PNNL-SA-121980. doi:10.1007/978-3-319-52383-5_5
- Ross K.A., G.J. Grant, J.T. Darsell, and D. Catalini. 2017. "Simultaneous Independent Control of Tool Axial Force and Temperature in Friction Stir Processing." In Friction Stir Welding and Processing IX, edited by Y Hovanski, et al, 269-275. Cham:Springer International Publishing. PNNL-SA-121974. doi:10.1007/978-3-319-52383-5_26
2016
- Das S., N.Y. Martinez, S. Das, R.S. Mishra, G.J. Grant, S. Jana, and E. Polikarpov. 2016. "Magnetic properties of friction stir processed composite." JOM. The Journal of the Minerals, Metals and Materials Society 68, no. 7:1925-1931. PNNL-SA-115918. doi:10.1007/s11837-016-1881-6
2015
- Saumyadeep Jana, Rajiv Mishra, Glenn Grant 2016 “Friction Stir Casting Modification for Enhanced Structural Efficiency -1st Edition”, A Volume in the Friction Stir Welding and Processing Book Series, eBook ISBN:9780128033609, Paperback ISBN: 9780128033593, Imprint: Butterworth-Heinemann: 27th October 2015
- Catalini D., D. Kaoumi, A. Reynolds, A. Reynolds, and G.J. Grant. 2015. "Dispersoid Distribution and Microstructure in Fe-Cr-Al Ferritic Oxide Dispersion-Strengthened Alloy Prepared by Friction Consolidation." Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 46, no. 10:4730-4739. PNNL-SA-92663. doi:10.1007/s11661-015-3059-1
2013
- Komarasamy M., R.S. Mishra, J.A. Baumann, G.J. Grant, and Y. Hovanski. 2013. "PROCESSING, MICROSTRUCTURE AND MECHANICAL PROPERTY CORRELATION IN Al-B4C SURFACE COMPOSITE PRODUCED VIA FRICTION STIR PROCESSING." In Friction Stir Welding and Processing VII. TMS 142nd Annual Meeting & Exhibition, March 3-7, 2013, San Antonio, Texas, edited by R Mishra, et al. Hoboken, New Jersey:John Wiley & Sons, Inc. PNNL-SA-91893. doi:10.1002/9781118658345.ch5
2011
- Jana S., Y. Hovanski, G.J. Grant, and K.F. Mattlin. 2011. "EFFECT OF TOOL FEATURE ON THE JOINT STRENGTH OF DISSIMILAR FRICTION STIR LAP WELDS." In Friction Stir Welding and Processing VI: Proceedings of a symposia sponsored by the Shaping and Forming Committee of the Materials Processing & Manufacturing Division of TMS (The Minerals, Metals & Materials Society) Held during the TMS 2011 Annual Meeting & Exhibition February 27-March 3, 2011, San Diego, California, edited by R Mishra, MW Mahoney, Y Sato, Y Hovanski and R Verma, 205-211. Hoboken, New Jersey:John Wiley & Sons, Inc. PNNL-SA-75817. doi:10.1002/9781118062302.ch25
- Kapoor R., V. Sree Hari Rao, R.S. Mishra, J.A. Baumann, and G.J. Grant. 2011. "Probabilistic fatigue life prediction model for alloys with defects: applied to A206." Acta Materialia 59, no. 9:3447-3462. PNNL-SA-75746. doi:10.1016/j.actamat.2011.02.019
2010
- Jana S., R.S. Mishra, J.A. Baumann, and G.J. Grant. 2010. "Effect of Process Parameters on Abnormal Grain Growth during Friction Stir Processing of a Cast Al Alloy." Materials Science and Engineering. A. Structural Materials: Properties, Microstructure and Processing 528, no. 1:189-199. PNNL-SA-73063.
- Jana S., R.S. Mishra, J.B. Baumann, and G.J. Grant. 2010. "Effect of Friction Stir Processing on Fatigue Behavior of an Investment Cast Al-7Si-0.6 Mg Alloy." Acta Materialia 58, no. 3:989-1003. PNNL-SA-68048.
- Jana S., R.S. Mishra, J.B. Baumann, and G.J. Grant. 2010. "Effect of Friction Stir Processing on Microstructure and Tensile Properties of an Investment Cast Al-7Si-0.6Mg Alloy." Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 41A, no. 10:2507-2521. PNNL-SA-70868. doi:10.1007/s11661-010-0324-1
- Jana S., Y. Hovanski, and G.J. Grant. 2010. "Friction Stir Lap Welding of Magnesium Alloy to Steel: A Preliminary Investigation." Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 41A, no. 12:3173-3182. PNNL-SA-70692.
- Stephens E.V., M.T. Smith, G.J. Grant, and R.W. Davies. 2010. Forming Limits of Weld Metal in Aluminum Alloys and Advanced High-Strength Steels. PNNL-19912. Richland, WA: Pacific Northwest National Laboratory. Forming Limits of Weld Metal in Aluminum Alloys and Advanced High-Strength Steels
2009
- Grant G.J., Y. Hovanski, and M.L. Santella. 2009. "Friction Stir & Ultrasonic Solid State Joining Magnesium." In 2009 Annual Progress Report: Lightweighting Materials. 9-27 - 9-37. Washington Dc, Washington:US Department of Energy, Office of Energy Efficiency & Renewable Energy. PNNL-SA-70176.
- Hovanski Y., G.J. Grant, and M.L. Santella. 2009. "Friction Stir Spot Welding of Advanced High Strength Steels." In Proceedings of the 2009 International Automotive Body Congress (IABC 2009), 22. Saline, Michigan:International Automotive Body Congress. PNNL-SA-68851.
- Hovanski Y., M.L. Santella, and G.J. Grant. 2009. "Friction Stir Spot Welding of Advanced High Strength Steels." In Friction Stir Welding and Processing V: Proceedings of Symposia Sponsored by the Shaping and Forming Committee of the Materials Processing & Manufacturing Division of TMS (The Minerals, Metals & Materials Society), February 15-19, 2009, San Francisco, California, edited by RS Mishra, MW Mahoney and TJ Lienert, 161-170. Warrendale, Pennsylvania:TMS - Minerals, Metals & Materials Society. PNNL-SA-65936.
- Jana S., R.S. Mishra, J.B. Baumann, and G.J. Grant. 2009. "Effect of Stress Ratio on the Fatigue Behavior of a Friction Stir Processed Cast Al-Si-Mg Alloy." Scripta Materialia 61, no. 10:992-995. PNNL-SA-68049.
- Santella M.L., G.J. Grant, Y. Hovanski, C. Schutte, C.D. Warren, and M.T. Smith. 2009. "Friction Stir Spot Welding of Advanced High-Stength Steel." In FY 2009 Annual Progress Report For Lightweighting Materials. 9-20 - 9-26. Richland, Washington:US Department of Energy, Office of Energy Efficiency & Renewable Energy. PNNL-SA-64010.
- Santella M.L., Y. Hovanski, A. Frederick, A. Frederick, G.J. Grant, and M.E. Dahl. 2009. "Friction Stir Spot Welding of DP780 Carbon Steel." Science and Technology of Welding and Joining 15, no. 4:271-278. PNNL-SA-68449.
2008
- Santella M.L., A. Frederick, A. Frederick, Y. Hovanski, and G.J. Grant. 2008. "Friction Stir Spot Welding of DP780 and Hot-Stamp Boron Steels." In SHEET METAL WELDING CONFERENCE XIII. Detroit, Michigan:American Welding Society, Detroit Section. PNNL-SA-59749.
- Santella M.L., Y. Hovanski, G.J. Grant, J.A. Carpenter, C.D. Warren, and M.T. Smith. 2008. "Friction Stir Spot Welding of Advanced High Strength Steels." In FY 2008 Annual Progress Report for Lightweighting Materials. 9-15 - 9-22. Richland, Washington:US Department of Energy, Office of Energy Efficiency & Renewable Energy. PNNL-SA-70149.
2007
- Hovanski Y., M.L. Santella, and G.J. Grant. 2007. "Friction stir spot welding of hot-stamped boron steel." Scripta Materialia 57, no. 9:873-876. PNNL-SA-55783.
- Mishra R.S., S. Webb, T.A. Freeney, Y.L. Chen, X. Gayden, G.J. Grant, and D.R. Herling. 2007. "FRICTION STIR SPOT WELDING OF 6016 ALUMINUM ALLOY." In Friction Stir Welding and Processing IV, 341-348. Warrendale, Pa:TMS. PNNL-SA-52682.
- Yadava M., R.S. Mishra, Y.L. Chen, X. Gayden, and G.J. Grant. 2007. "FRICTION-STIR-LAP-WELDS OF AA6111 ALUMINUM ALLOY." In Friction Stir Welding and Processing IV, 203-212. Warrendale, Pennsylvania:TMS. PNNL-SA-52701.
2006
- Grant G.J. 2006. "LOW-COST COMPOSITES IN VEHICLE MANUFACTURE - Low-Cost Composites in Automotive and Heavy Vehicle Manufacture." JOM. The Journal of the Minerals, Metals and Materials Society 58, no. 11:66-67. PNNL-SA-52328.
- Grant G.J., D.R. Herling, W.J. Arbegast, C.D. Allen, and C.M. Degen. 2006. "Superplastic Forming of Aluminum Multisheet Structures Fabricated Using Friction Stir Welding and Refill Friction Stir Spot Welding." In 6th International Symposium on Friction Stir Welding, October 10-13, 2006 Saint-Sauveur, Canada, 52. Cambridge:TWI Limited. PNNL-SA-53238.
- Grant G.J., R.W. Davies, E.V. Stephens, S. Wazny, L. Kaunitz, and D.J. Waldron. 2006. "The Formability of Friction Stir Welds in Automotive Stamping Environments." SAE Transactions. Journal of Materials & Manufacturing V114-5. PNNL-SA-48243.
- Tartakovsky A.M., G.J. Grant, X. Sun, and M.A. Khaleel. 2006. "MODELING OF FRICTION STIR WELDING (FSW) PROCESS USING SMOOTH PARTICLE HYDRODYNAMICS (SPH)." In SAE World Congress & Exhibition, April 3-6, 2006, Detroit, Michigan, Paper No. 2006-01-1394. Warrendale, Pennsylvania:SAE International. PNNL-SA-49534. doi:10.4271/2006-01-1394
2005
- Grant G.J., R.W. Davies, E.V. Stephens, s. wazny, L. Kaunitz, and D. Waldron. 2005. "The Formability of Friction Stir Welds in Automotive Stamping Environments." In SAE 2005 World Congress, Advances in Welding and Friction Stir Welding for Automotive Applications, in Detroit, published as WELDING, SAE SP-1959, 141-152. Warrendale, Pennsylvania:SAE International. PNNL-SA-43837.
- Howard S.M., B.K. Jasthi, W.J. Arbegast, G.J. Grant, S.K. Koduri, D.R. Herling, and D.S. Gelles. 2005. "Friction Stir Welding Of Ma957 Oxide Dispersion Strengthened Ferritic Steel." In Fusion Materials Semi-Annual Report for the period ending December 31, 2004, DOE/ER-0313/37. 55-60. Oak Ridge, Tennessee:Oak Ridge National Laboratory. PNNL-SA-44740.
- Stephens E.V., G.J. Grant, R.W. Davies, S. Wazny, L. Kaunitz, B. Fulbright, and D. Waldron. 2005. "Evaluation of the Mechanical Performance of Self-Piercing Rivets in Friction Stir Welded Structures." In Advances in Welding and Friction Stir Welding for Automotive Applications: Society of Automotive Engineers 2005 World Congress, April 11-14, 2005, Detroit, Michigan, SP-1959, 153-158. Warrendale, Pennsylvania:SAE International. PNNL-SA-43820.
2004
- Johnson K.I., B.N. Nguyen, R.W. Davies, G.J. Grant, and M.A. Khaleel. 2004. "A Numerical Process Control Method for Circular-Tube Hydroforming Prediction." International Journal of Plasticity 20, no. 6:1111-1137. PNNL-SA-37180.
2003
- Johnson K.I., B.N. Nguyen, G.J. Grant, R.W. Davies, and M.A. Khaleel. 2003. "A Comparison of Tube-Hydroforming Experiments and Predictions Using a Numerical Process Control Method." In Energy Efficient Manufacturing Processes: Proceedings of the Technical Sessions Presented at the 132nd TMS Annual Meeting, edited by I Anderson, T Marechaux and C Cockrill, 137-146. Warrendale, Pennsylvania:TMS. PNNL-SA-37744.
- Nguyen B.N., K.I. Johnson, G.J. Grant, and M.A. Khaleel. 2003. "Inverse Analysis of Aluminum Tubes Hydroformed Under Free Conditions and Within a Conical Die." In Energy Efficient Manufacturing Processes. Fourth Materials Processing & Manufacturing Division International Symposium on Global Innovations, edited by I. Anderson, T. Marechaux, C. Cockrill, 129-136. Warrendale, Pennsylvania:The Minerals, Metals & Materials Society. PNNL-SA-37251.
2001
- Grant G.J., D.E. Mccready, D.R. Herling, and M.T. Smith. 2001. "Interfacial Reactions at Elevated Temperatures in New Low-Cost AL/SiC Metal Matrix Composite." In Affordable metal-matrix composites for high performance applications, edited by Ab Pandey, KL Kendig, TJ Watson, 233-250. Warrendale, Pennsylvania:The minerals, metals and materials society. PNNL-SA-35130.
1999
- Davies R.W., H.E. Oliver, H.E. Oliver, M.T. Smith, and G.J. Grant. 1999. "Characterizing Al Tailor-Welded Blanks for Automotive Applications." JOM. The Journal of the Minerals, Metals and Materials Society 51, no. 11:46-50. PNNL-SA-33482.